About this calculator

Enter the finished wall size, stud centres and openings. Tracks cover the floor and head; studs include both ends and opening jambs. Board quantities cover both wall faces and selected layers, with waste applied.

Frequently asked questions

Should I use 400 mm or 600 mm stud centres?

600 mm is common for standard boards and light-duty walls. Use 400 mm for heavier finishes, taller walls or where the board and system specification requires it.

Does this include both faces of the wall?

Yes. Board area covers both sides and the selected number of layers, after subtracting the opening area and adding waste.

Can I use these quantities for a fire-rated wall?

Use the double-layer option for an estimate, but follow the tested wall-system specification for stud gauge, board type, fastener spacing, insulation and head details.

What does the Metal Stud & Track Partition Calculator do?

Calculate metal tracks, studs, noggins, fixings, plasterboard and estimated material cost for an internal partition wall. Enter the finished wall size, stud centres and openings. Tracks cover the floor and head; studs include both ends and opening jambs. Board quantities cover both wall faces and selected layers, with waste applied.

Is the Metal Stud & Track Partition Calculator free to use?

Yes. Every calculator on Calcurly.com is free, works in your browser without sign-up, and can be embedded on your own website.

How accurate is the Metal Stud & Track Partition Calculator?

Results are calculated in real time using industry-standard formulas. Treat the output as a well-informed estimate — always cross-check with local regulations, product datasheets, or a qualified plastering & drywall professional before committing to a purchase or a job.

What inputs does the Metal Stud & Track Partition Calculator need?

Enter values for: Wall length (m), Wall height (m), Stud centres, Door/opening count, Total opening area (m²), Board layers per face. Sensible defaults are pre-filled where possible so you can start with a single change.

Can I embed the Metal Stud & Track Partition Calculator on my own website?

Yes — copy the iframe snippet at the bottom of this page, or use the Embed Generator to customise the size. The embedded version stays in sync with the live calculator on Calcurly.com.